manualshive.com logo in svg

NEC POWERMATE VP, Руководство пользователя

Поделиться
Скачать
NEC POWERMATE VP Скачать руководство пользователя страница 86

 

  

 Using NEC Utilities and Drivers   3-1

Using NEC Utilities
and Drivers

 

This chapter provides information for the following NEC
drivers and utilities that you can use with your system:

n

 

mouse driver

n

 

video drivers

n

 

BIOS Update utility.

MOUSE DRIVER

 

Mouse driver software contains the basic operating in-
structions between the computer and your mouse. It tracks
mouse position, gets data from the mouse buttons, and dis-
plays a text cursor or graphics pointer on the screen, based
on information from your mouse and application. See the
following sections to run mouse drivers for your operating
system.

 

Use the following information to run mouse

drivers for MS-DOS. The information is not appropri-
ate for using your mouse in Windows.

 

The MS-DOS mouse driver is LMOUSE.COM and works
with all applications that use the Microsoft mouse driver.

 

To run LMOUSE.COM, you must be in the Windows
directory where it is located, or you must include the
mouse software directory in your PATH statement. Then,
at the MS-DOS prompt, type 

LMOUSE

 and press 

Enter.

3 

Содержание POWERMATE VP
































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды