manualshive.com logo in svg

NEC POWERMATE VP, Руководство пользователя

Поделиться
Скачать
NEC POWERMATE VP Скачать руководство пользователя страница 26

 

  

 Using Your Computer   1-11

 CD-ROM reader controls and indicators

 

The CD-ROM reader has the following features:

n

 

A jack for connecting headphones. Use headphones
with a stereo mini-jack plug.

n

 

A volume control knob for adjusting the headphone
volume.

 

The volume control has no effect on the

audio outputs from the CD-ROM reader’s audio con-
nector.

n

 

A busy indicator that lights during read operations.

n

 

An eject/retract button to open or close the CD tray
when the power is on.

n

 

A hole in the front panel to access the emergency eject
screw. If power is unavailable and you need to eject the
CD tray, insert a jeweler's screw driver and turn the
screw counterclockwise to open the CD tray. Turn the
screw clockwise to close the tray again.

 

Содержание POWERMATE VP
































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды