NEC POWERMATE ENTERPRISE NETPC - SERVICE, Руководство по обслуживанию

Страница: 69 / 182

Technical Information 2-23
„
On Modem Ring
This field enables an external modem to work even when the system is in a power
reduction state. Choosing “Power On” (the default) restores the system to full
power so it can receive a modem ring. Choose “Stay off” if you do not want full
power restored on a modem ring.
„
On LAN
This field enables the system to be contacted via a LAN connection even when the
system is in a power reduction state. Choosing “Power On” (default) restores the
system to full power so the LAN connection can be made. Choose “Stay off” if
you do not want full power restored.
„
On PME
This field controls how the system responds to a PCI Power Management Enable
(PME) wake up event. The choices are “Power On” (the default) and “Stay Off.”
„
Boot Order
These fields allow you to set the order in which the system’s drives boot up. The
default order is:

Diskette drive

Hard disk

LANDesk
®
Service or network.
„
Hard Drive
This field lists the bootable hard disk drives in the system as well as bootable ISA
boards. Use this field to change the booting order.
„
Boot Time Diagnostic screen
When set to enabled, this field allows you to display the Diagnostic Screen during
boot up. The default setting is “Disabled.”
„
Floppy Check
When set to “Enabled,” this field verifies the floppy type during boot up;
“Disabled” (the default) speeds up the boot.
„
Virus Check Reminder
This field displays a reminder message during boot up at preset intervals (daily,
once a week, or once a month). The default setting is “Disabled.”
„
System Backup Reminder
This field displays a reminder message during boot up at preset intervals (daily,
once a week, or once a month). The default setting is “Disabled.”
„
Fixed Disk Boot Sector
This field write protects the hard disk boot sector to protect against viruses. Your
choices are “Normal” (the default) and “Write Protect.”