![background image](http://html1.mh-extra.com/html/nec/neax2000-ivs2/neax2000-ivs2_installation-manual_4067073386.webp)
CHAPTER 3 LAMP INDICATIONS AND SWITCH SETTINGS
PN-30DTC-C (DTI)
NEAX2000 IVS
2
Installation Procedure Manual
ND-70928 (E), Issue 3.0
Page 357
The figure in the SWITCH NAME column and the position
in the SETTING POSITION
column indicate the standard setting of the switch. When the switch is not set as shown by the
figure and
, the setting of the switch varies with the system concerned.
NOTE 1: Set the groove on the switch to the desired position.
NOTE 2: When the power is on, flip the MB switch to ON (UP position) before plugging/
unplugging the circuit card.
JPS
(Jumper pin)
Balanced transmission
(For twisted-pair cable)
LEFT
TA is grounded on the transmission
line (For coaxial cable)
JPR
(Jumper pin)
Balanced transmission
(For twisted-pair cable)
DOWN
RA is grounded on the transmission
line (For coaxial cable)
JP
(Jumper pin)
RIGHT
Line impedance: 75
Ω
(For coaxial cable)
Line impedance: 120
Ω
(For twisted-pair cable)
JP1
(Jumper pin)
Always set to DOWN
SWITCH
NAME
SWITCH
NUMBER
SETTING
POSITION
FUNCTION
CHECK
RIGHT
UP
LEFT
DOWN
Содержание NEAX2000 IVS2
Страница 1: ...FEBRUARY 2001 NECAmerica Inc ND 70928 E ISSUE 3 STOCK 151998 Installation Procedure Manual...
Страница 19: ...NEAX2000 IVS2 Installation Procedure Manual Page x ND 70928 E Issue 3 0 This page is for your notes...
Страница 73: ...This page is for your notes NEAX2000 IVS2 Installation Procedure Manual Page 44 ND 70928 E Issue 3 0...
Страница 259: ...NEAX2000 IVS2 Installation Procedure Manual Page 230 ND 70928 E Issue 3 0 This page is for your notes...