![background image](http://html1.mh-extra.com/html/nec/neax2000-ivs2/neax2000-ivs2_installation-manual_4067073295.webp)
CHAPTER 3 LAMP INDICATIONS AND SWITCH SETTINGS
PN-AP00-B (AP00)
NEAX2000 IVS
2
Installation Procedure Manual
Page 266
ND-70928 (E), Issue 3.0
NOTE 1: Set the groove on the switch to the desired position.
NOTE 2: When the power is on, flip the MB switch to ON (UP position) before plugging/
unplugging the circuit card.
NOTE 3: When the DCE connected to the port does not provide a function to send the DSR
signals, set the switch to ON. In this case, the AP00 card cannot recognize the actual
state of the DCE, so that the call records or system messages will not be stored in the
memory buffer on the AP00 card even if the cable is disconnected from the DCE.
When the switch is set to OFF, the call records or system messages will be stored
when the cable is disconnected, and will be sent when the cable is re-connected.
NOTE 4: The use of the external clock (from the distant end) or the internal clock is determined
by the following table:
CLOCK
SW2
2
6
External
ON
OFF
Internal
OFF
ON
Содержание NEAX2000 IVS2
Страница 1: ...FEBRUARY 2001 NECAmerica Inc ND 70928 E ISSUE 3 STOCK 151998 Installation Procedure Manual...
Страница 19: ...NEAX2000 IVS2 Installation Procedure Manual Page x ND 70928 E Issue 3 0 This page is for your notes...
Страница 73: ...This page is for your notes NEAX2000 IVS2 Installation Procedure Manual Page 44 ND 70928 E Issue 3 0...
Страница 259: ...NEAX2000 IVS2 Installation Procedure Manual Page 230 ND 70928 E Issue 3 0 This page is for your notes...