![background image](http://html1.mh-extra.com/html/nec/neax2000-ivs2/neax2000-ivs2_installation-manual_4067073245.webp)
CHAPTER 2 INSTALLATION
Mounting Circuit Cards
NEAX2000 IVS
2
Installation Procedure Manual
Page 216
ND-70928 (E), Issue 3.0
MOUNTING CIRCUIT CARDS
(1)
Before mounting the circuit cards, confirm the following items.
• Wrist Strap is connected to Frame Ground.
• Switch settings of circuit cards are already completed. See
• The “SW1” switches of all PZ-PW121/PZ-PW126 cards are turned off.
(2)
Mount circuit cards into their mounting positions according to the “Bay Face Layout” and
“Port Assignment Table” given in the Office Data Programming Manual. See
“
Mounting Conditions of Circuit Card
”.
This figure shows the mounting method of circuit cards.
Figure 2-111 Mounting of Circuit Cards
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
CARD LABEL
CARD FRONT SIDE
WRIST STRAP
TO FRAME GROUND CONNECTION
(
)
CARD CONTACT SIDE
Содержание NEAX2000 IVS2
Страница 1: ...FEBRUARY 2001 NECAmerica Inc ND 70928 E ISSUE 3 STOCK 151998 Installation Procedure Manual...
Страница 19: ...NEAX2000 IVS2 Installation Procedure Manual Page x ND 70928 E Issue 3 0 This page is for your notes...
Страница 73: ...This page is for your notes NEAX2000 IVS2 Installation Procedure Manual Page 44 ND 70928 E Issue 3 0...
Страница 259: ...NEAX2000 IVS2 Installation Procedure Manual Page 230 ND 70928 E Issue 3 0 This page is for your notes...