CHAPTER 3 LAMP INDICATIONS AND SWITCH SETTINGS
PN-DAID (DAI)
NEAX2000 IVS
2
Installation Procedure Manual
Page 268
ND-70928 (E), Issue 1.0
The figure in the SWITCH NAME column and the position in
in the SETTING POSITION
column indicate the standard setting of the switch. When the switch is not set as shown by the
figure and
, the setting of the switch varies with the system concerned.
NOTE 1: Set the groove on the switch to the desired position.
NOTE 2: When the power is on, flip the MB switch to ON (UP position) before plugging/unplug-
ging the circuit card.
SW3 (DIP SW)
1
Always set to ON
2
Always set to ON
3
Always set to ON
4
Always set to OFF
JPS (Jumper pin)
Balanced transmission: 120 ohms
(For twisted-pair cable)
Left
TA is grounded on the transmission
line: 75 ohms (For coaxial cable)
JPR (Jumper pin)
Balanced transmission: 120 ohms
(For twisted-pair cable)
Left
RA is grounded on the transmission
line: 75 ohms (For coaxial cable)
E1Z (Jumper pin)
Line impedance:
120 ohms (For twisted-pair cable)
Left
Line impedance:
75 ohms (For coaxial cable)
SRT (Jumper pin)
Right
For mounting this card on PIM0
Left
For mounting this card on PIM1-
PIM7
JP (Jumper pin)
Line impedance:
120 ohms (For twisted-pair cable)
DOWN
Line impedance:
75 ohms (For coaxial cable)
(Continued)
SWITCH NAME
SWITCH
NUMBER
SETTING
POSITION
FUNCTION
CHECK
1 2 3 4
ON
ON
ON
ON
ON
Right
Right
Right
UP
Содержание NEAX 2000IVS2
Страница 1: ...JANUARY 2000 NECAmerica Inc ND 70928 E ISSUE 1 STOCK 151998 Installation Procedure Manual ...
Страница 18: ...NEAX2000 IVS2 Installation Procedure Manual Page x ND 70928 E Issue 1 0 This page is for your notes ...
Страница 232: ...NEAX2000 IVS2 Installation Procedure Manual Page 206 ND 70928 E Issue 1 0 This page is for your notes ...
Страница 416: ...NEAX2000 IVS2 Installation Procedure Manual Page 390 ND 70928 E Issue 1 0 This page is for your notes ...