89
Appendix
Error Code
Error message
Description
267
Fan13 Stop Precaution
Fan13 Stop Precaution
268
Fan14 Stop Precaution
Fan14 Stop Precaution
271
IMB:SD Tamper Terminate
Terminated service door tamper event latched by IMB.
* This message would be shown on Log, not on LCD.
301
System Error
ICP status error
302
Self Test Error
ICP status error
305
Key Error
ICP status error
306
Certificate Error
ICP status error
329
FMT Sequence Data File Mismatch
ICP status error
330
FMT DMD Data File Mismatch
ICP status error
333
Satellite Hardware Mismatch
ICP status error
335
Red Satellite Reports Reset
FSB status error
336
Red Satellite Serial Link Error
ICP or FSB status error
337
Red Satellite Firmware Configuration Error
ICP or FSB status error
338
Red DAD1000 Bias Under Voltage Error
FSB status error
339
Red DAD1000 Reset Under Voltage Error
FSB status error
340
Red DAD1000 Offset Under Voltage Error
FSB status error
341
Red DAD1000 Thermal Shutdown Error
FSB status error
342
Green Satellite Reports Reset
FSB status error
343
Green Satellite Serial Link Error
ICP or FSB status error
344
Green Satellite Firmware Configuration Error
ICP or FSB status error
345
Green DAD1000 Bias Under Voltage Error
FSB status error
346
Green DAD1000 Reset Under Voltage Error
FSB status error
347
Green DAD1000 Offset Under Voltage Error
FSB status error
348
Green DAD1000 Thermal Shutdown Error
FSB status error
349
Blue Satellite Reports Reset
FSB status error
350
Blue Satellite Serial Link Error
ICP or FSB status error
351
Blue Satellite Firmware Configuration Error
ICP or FSB status error
352
Blue DAD1000 Bias Under Voltage Error
FSB status error
353
Blue DAD1000 Reset Under Voltage Error
FSB status error
354
Blue DAD1000 Offset Under Voltage Error
FSB status error
355
Blue DAD1000 Thermal Shutdown Error
FSB status error
370
ICP Frame Memory Test Result Fail
ICP self test error due to “Frame memory error”
372
ICP Data Path Signature Test Result Fail
ICP self test error due to “Data Path Signature Test Result
Fail”
380
DRS Error(Low Battery)
FMT board low battery
* When this error has occurred, IMB can not Marriage with
the projector.
* After this error has occurred, Integrity Error will occur when
you turn on the power again.
381
SEC No Battery
No communication with the secure processor.
* When this error has occurred, IMB can not Marriage with
the projector.
* After this error has occurred, Integrity Error may occur
when you turn on the power again.
500
IMB Comm Fail
No communication with the IMB.
510
IMB:System Error
IMB Status error
511
IMB:Self Test Error
IMB Status error
519
IMB:Certificate or Key Error
IMB Status error
520
IMB:ICP Communications Status
IMB fails to do logical marriage to projector.
537
IMB:RTC Error
IMB RTC is “invalid”.
543
IMB:FPGA Temperature out of range
IMB Status error
550
IMB:Supply voltage out of range
IMB Status error
