74
LCD Menu
Off Timer
Automatically turns off the projector power once the configured time has elapsed. The time until the power is turned off can be set
in steps of 1 hour (up to a maximum of 24 hours). The timer starts from when the setting is applied by pressing the ENTER button.
While the timer is running, the remaining time is displayed in the format “Left **.* H”. Set to “No Preset” to stop the timer.
←
Displays the remaining time until the power is turned off.
←
Sets the time until the power is turned off. (No Preset: Timer off)
Message
Sets the time until the air filter replacement cycle (units: hours). Once the usage time of the air filter exceeds the configured time,
the message (“Filter Time Over”) is displayed on the LCD screen. The default setting is set to “0 (-----) [H]”. In this setting, “Filter
Time Over” is not displayed.
←
The current setting value is displayed with an asterisk (*).
←
Sets the time until the replacement cycle (units: hours).
Silent Mode
Sets whether the status indicators, buzzer, indicators on the projector’s control panel, illumination, and LCD screen backlight are
enabled or disabled.
←
Selects the item.
←
Displays the currently selected item with asterisk (*).
←
Displays the setting.
Rear LED
Sets whether to use or not use the status indicators.
Enable: Use
Disable: Not use (the status indicators do not light up)
Buzzer
Sets whether to use or not use the buzzer.
Enable: Use
Disable: Not use (the buzzer does not sound)
Control Button
Sets whether to use or not use the indicators on the projector’s control panel.
Enable: Use
Disable: Not use (the LED next to the buttons do not light up)
LCD Backlight
Sets whether to use or not use the illumination and LCD screen backlight on the projector’s control
panel.
Enable: Use
Disable: Not use (turns off the illumination and LCD screen backlight on the projector’s control panel)
