NEC N8100-1447F, Руководство пользователя

Страница: 69 / 332

Configuring Your Server 4-9
The items which can be set on the Main menu screen and their functions are described below.
Option Parameter Description Your Setting
System Time HH:MM:SS Set the system time.
System Date MM/DD/YYYY Set the system date.
Legacy Diskette A [Disabled]
360Kb 5
1
/
4
1.2MB 5 1 /
4
720Kb 3
1
/
2
1.44/1.25MB 3 1 /
2
2.88MB 3
1
/
2
Set the settings of optional floppy disk
drive.
If you install an optional internal floppy
disk drive, set this item to
"1.44/1.25MB 3
1 /
2
".
If you replace the floppy disk drive
with internal backup device and use
the external USB floppy disk drive for
reinstallation of OS or maintenance
work, set this item to "Disabled".
Hard Disk Pre-Delay Disabled
3 seconds
6 seconds
9 seconds
12 seconds
15 seconds
21 seconds
[30 seconds]
When accessing the internal SATA
hard disk drive for the first time during
POST, the system waits for the
specified time until the drive becomes
ready.
SATA Port 1 - 6 – Displays the type of devices
connected to each port.
The settings of some items may be
changed. However, leave the items as
they are at the shipment.
Advanced Processor
Options Select submenu Shows the processor settings
submenu.
Language [English (US)]
Français
Deutsch
Español
Italiano Select which language BIOS displays.
[ ]: Factory-set
IMPORTANT:
Check and adjust the system clock before the
operation if any of the following conditions is applicable.
„
After carriage of device
„
After storage of device
„
After the device is entered into the pause state under the
environmental condition enduring device operation (temperature:
10°C - 35°C, humidity: 20% - 80%)
Check the system clock at the rough rate of once per month. When the
system clock is installed in a system requiring high time precision, it is
recommended to use a time server (NTP server).
If the system clock is remarkably delayed or advanced as the passage of
time in spite of adjustment, contact your service representative for
maintenance.