NEC N8100-1447F, Руководство пользователя

Страница: 32 / 332

2-6 General Description
1 AC inlet
The AC inlet is connected with the power cord.
2 Fixing screws
Secures the left side cover.
3 Cover lock plate
Installing a theft prevention device
protects the internal components of the
server from being stolen.
4 Mouse connector
The mouse connector is connected with the mouse coming with the server.
5 Keyboard connector
The keyboard connector is connected with keyboard coming with the server.
6 USB connectors
The USB connectors are connected with devices accepting the USB interface.
7 Serial port A connector
The serial port connector is used to connect the server to a device with the serial interface. The
server cannot be directly connected to a leased line through the connector.
Note: If N8117-01A is connected, the connector on N8117-01A side becomes serial port B
connector.
8 Printer port connector
The printer port connector is connected with a printer with the Centronics interface.
9 Monitor connector
The monitor connector is connected with the display unit.
10 LAN connector
The LAN connector is connected with a network system on LAN (1000BASE-T/100BASE-
TX/10BASE-T). The value following the bold-faced number indicates the port number.
11
Link/ACT lamp
The Link/ACT lamp shows the LAN access status.
12 1000/100/10 lamp
1000/100/10 lamp indicates the LAN transfer rate.
13 NMI switch
Press this switch when collecting system event logs occurred in the system.
NOTE: Consult with your service representative before collecting logs. Collecting logs while the
server is in the successful operation may affect the system operation.