manualshive.com logo in svg

NEC MuPD78F0132H, Руководство пользователя

NEC MuPD78F0132H - устройство с обширным функционалом, требующее правильной инструкции по использованию. Получите бесплатное Руководство пользователя для NEC MuPD78F0132H, чтобы насладиться всеми возможностями этого продукта. Скачайте его с manualshive.com прямо сейчас и начните эксплуатировать устройство эффективно.

Поделиться
Скачать
background image

APPENDIX  D   LIST  OF  CAUTIONS 

User’s Manual  U16899EJ2V0UD 

531

(17/24) 

Chapter 

Cl

assi

fi

cati

on 

Function Details 

of 

Function 

Cautions Page 

The read value of the SBRT6 bit is always 0.  SBRT6 is automatically cleared to 0 
after SBF reception has been correctly completed. 

p. 302 

Before setting the SBTT6 bit to 1, make sure that bit 7 (POWER6) and bit 6 
(TXE6) of ASIM6 = 1. 

p. 302 

The read value of the SBTT6 bit is always 0.  SBTT6 is automatically cleared to 0 
at the end of SBF transmission. 

p. 302 

Before rewriting the DIR6 and TXDLV6 bits, clear the TXE6 and RXE6 bits to 0. 

p. 302 

ASICL6: 
Asynchronous 
serial interface 
control register 
6 

When using the 78K0/KE1+ to evaluate the program of a mask ROM version of 
the 78K0/KE1, set the SBTT6, SBL62, SBL61, and SBL60 bits to 0, 1, 0, 1, 
respectively. 

p. 302 

POWER6, 
TXE6, RXE6: 
Bits 7, 6, and 5 
of ASIM6 

Clear POWER6 to 0 after clearing TXE6 and RXE6 to 0 to set the operation stop 
mode. 
To start the operation, set POWER6 to 1, and then set TXE6 and RXE6 to 1. 

p. 304 

UART mode 

Take relationship with the other party of communication when setting the port 
mode register and port register. 

p. 305 

Parity type and 
operation 

Fix the PS61 and PS60 bits to 0 when the device is incorporated in LIN. 

p. 309 

The TXBF6 and TXSF6 flags of the ASIF6 register change from “10” to “11”, and 
to “01” during continuous transmission.  To check the status, therefore, do not use 
a combination of the TXBF6 and TXSF6 flags for judgment.  Read only the 
TXBF6 flag when executing continuous transmission. 

p. 311 

Continuous 
transmission 

When the device is incorporated in a LIN, the continuous transmission function 
cannot be used.  Make sure that asynchronous serial interface transmission 
status register 6 (ASIF6) is 00H before writing transmit data to transmit buffer 
register 6 (TXB6). 

p. 311 

TXBF6 during 
continuous 
transmission: 
Bit 1 of ASIF6 

To transmit data continuously, write the first transmit data (first byte) to the TXB6 
register.  Be sure to check that the TXBF6 flag is “0”.  If so, write the next transmit 
data (second byte) to the TXB6 register.  If data is written to the TXB6 register 
while the TXBF6 flag is “1”, the transmit data cannot be guaranteed. 

p. 311 

To initialize the transmission unit upon completion of continuous transmission, be 
sure to check that the TXSF6 flag is “0” after generation of the transmission 
completion interrupt, and then execute initialization.  If initialization is executed 
while the TXSF6 flag is “1”, the transmit data cannot be guaranteed. 

p. 311 

TXSF6 during 
continuous 
transmission: 
Bit 0 of ASIF6 

During continuous transmission, an overrun error may occur, which means that 
the next transmission was completed before execution of INTST6 interrupt 
servicing after transmission of one data frame.  An overrun error can be detected 
by developing a program that can count the number of transmit data and by 
referencing the TXSF6 flag. 

p. 311 

Be sure to read receive buffer register 6 (RXB6) even if a reception error occurs.  
Otherwise, an overrun error will occur when the next data is received, and the 
reception error status will persist. 

p. 315 

Reception is always performed with the “number of stop bits = 1”.  The second 
stop bit is ignored. 

p. 315 

Chapter 14 

Soft 

Serial 
interface 
UART6 

Normal 
reception 

Be sure to read asynchronous serial interface reception error status register 6 
(ASIS6) before reading RXB6. 

p. 315 

 

Содержание MuPD78F0132H





























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MuPD78F0132H

Lamtec FA1 Quick Reference preview
FA1
Бренд: Lamtec Страницы: 22
BRT Systems LDSBus LC020101A-F Manual preview
LDSBus LC020101A-F
Бренд: BRT Systems Страницы: 15
GeoVision GV-CS1320 Quick Start Manual preview
GV-CS1320
Бренд: GeoVision Страницы: 21
YASKAWA Lift Inverter L1000V Technical Manual preview
Lift Inverter L1000V
Бренд: YASKAWA Страницы: 282
Eaton C22- P Series Instruction Leaflet preview
C22- P Series
Бренд: Eaton Страницы: 2
PTZOptics PT-JOY-G4 Quick Start Manual preview
PT-JOY-G4
Бренд: PTZOptics Страницы: 4
Allen-Bradley Kinetix 350 User Manual preview
Kinetix 350
Бренд: Allen-Bradley Страницы: 162
PXM Driver LED 1x2A/48V Manual preview
Driver LED 1x2A/48V
Бренд: PXM Страницы: 11
Samson series 43 Mounting And Operating Instructions preview
series 43
Бренд: Samson Страницы: 20
Unika PR-1V Operation Manual preview
PR-1V
Бренд: Unika Страницы: 4
thomann Stairville DMX Invader 1024 NET User Manual preview
Stairville DMX Invader 1024 NET
Бренд: thomann Страницы: 40
Cooper WaveLinx Wired ILM-SCMA0401-2 Installation Instructions Manual preview
WaveLinx Wired ILM-SCMA0401-2
Бренд: Cooper Страницы: 21
Cameo CONTROL 54 User Manual preview
CONTROL 54
Бренд: Cameo Страницы: 52
ESBE 98140201 Manual preview
98140201
Бренд: ESBE Страницы: 6
YASKAWA CIMR-ZU5A Series Quick Start Manual preview
CIMR-ZU5A Series
Бренд: YASKAWA Страницы: 64
RKC INSTRUMENT HA430 Operation Manuals preview
HA430
Бренд: RKC INSTRUMENT Страницы: 176
Epson S1R72104 Technical Manual preview
S1R72104
Бренд: Epson Страницы: 65
Epson S1R72U16 Support Manual preview
S1R72U16
Бренд: Epson Страницы: 23

Бренды по названию

Популярные бренды

Загрузить еще бренды