1. Installing Internal Optional Devices
Express5800/R120h-2M User’s Guide
86
Chapter 2 Preparations
3.
Adjust the position of the riser card edge of the secondary riser card to the position of the connector, and
push it in place from above.
Raise the screw handles located on the upper part of the riser card and push it downwards while turning it
180° to the right to fix the riser card in place. Then, return the screw handles to their original positions.
4. See
Chapter 2 (1.27 Attaching the air baffle)
to attach the top cover of the server.
Note
In order to prevent damage of the system due to improper cooling or elevated
temperature, please do not activate the server or enclosure without implementing
any of component or blank on all of drive bays and device bays.
5. Please
see
Chapter 2 (2 Installation and Connection)
in this manual to conduct installation and connection,
and turn the power supply ON.
Installing Tertiary Riser Card
Please prepare the following before installing the options.
Parts included in the option kit
T-10 hexalobular driver
Note
In order to prevent the damage to server's main body or the expansion board,
please remove all the AC power cables before removing/installing riser card.
To install the components, follow these steps.
1.
See steps 1 to 6 in
Chapter 2 (1.2 Overview of Installation and Removal)
for preparations.