![background image](http://html.mh-extra.com/html/nec/express5800-r120h-2m/express5800-r120h-2m_user-manual_251298156.webp)
1. Installing Internal Optional Devices
Express5800/R120h-2M User’s Guide
156
Chapter 2 Preparations
6.
Install the 2.5-inch drive blank in the drive bay unused.
Removing the PCIe SSD Drive
To remove the PCIe SSD drive, follow the procedure below. In addition, when discarding or transferring the
removed PCIe SSD drive, make sure to erase the data at your own risk in accordance with
Chapter 1 (1. Transfer
and storage)
of the
"Maintenance Guide."
Important NEC assumes no liability for data leakage should the product be transferred
to a third party without erasing the data.
1.
Press the power switch.
The LED of the removal prohibit switch lights up and flashes. Do not press this switch while the LED is
lit.
Note
Do not remove the PCIe SSD from the drive bay if the LED of the removal prohibit
switch is flashing. The flashing LED of the removal prohibit switch indicates that
the device is still in use. Removing the PCIe SSD before completion of the device
signal and traffic flow may result in data loss.
2.
When the LED of the removal prohibition switch does not flash nor lights up, press the removal prohibit
switch and open the release lever.
3.
Remove the drive.