NEC Express5800/iR120a-1E, Руководство пользователя, Страница: 65 / 378

Setting Up Your Server 3-11
Firmly fit the inner rails on the sides of the server into the rail assemblies that are installed
on the rack, and then slowly push the server into the rack.
When the server is completely pushed into the rack, the server is locked.
IMPORTANT:
„
Be very careful not to get your finger caught in the levers or rails.
„
Insert both sides of inner rails straight into the rack.
„
Hold the thumbscrews on both sides of the server, and install the
server carefully while making sure the installation position.
NOTE:
At the first installation, you may feel strong friction in pushing
because the mechanical components cannot be completely engaged
with each other. Push the server intensely.
3.
Make sure that the sliding rails move smoothly by pulling the server out of the rack and
pushing it in several times.
NOTE:
To install the server in the location adjacent to the other device,
pay attention to interference. If the installing server disturbs the other
devices already been installed, adjust the position, and install the rail
assembly again.