![background image](http://html1.mh-extra.com/html/nec/express5800-e120d-1/express5800-e120d-1_user-manual_3946351093.webp)
2. Installation and Connection
Express5800/E120d-1 User’s Guide
93
Chapter 2 Preparations
2.2.1
Connecting to Uninterruptible Power Supply (UPS)
To connect the power cord of the server to a UPS, use the connector output on the rear of the UPS. For
details, refer to the manual supplied with the UPS.
When the power cord is connected to a UPS, the BIOS settings may need to be changed in order to link the
server with the power supply from the UPS.
To change the settings, select "
Server
" and then select "
Power Control Configuration
" and then
"
AC-LINK
" in BIOS Setup Utility, and change the displayed parameters. Select
Power On
to perform
automatic operations by using the UPS. For details, refer to
Chapter 3 (2.BIOS Setup Utility (SETUP))
.
Option slot
Overload protection
reset button
Connector outputs
Input connector
(NEMA5-15P)
Voltage sensitivity setting button
Computer interface port (COM)
TVSS device connector
Example
Computer interface port (UPS)