1. Installing Internal Optional Devices
Express5800/E120d-1 User’s Guide
54
Chapter 2 Preparations
13. Set an addition fan in a fan bracket.
14. Connect the fan cable with connector on motherboard.
15. Continue to install or remove internal optional devices, mount and connect the server, and turn it on.
16. Run BIOS Setup Utility (SETUP) to confirm the following settings. Refer to
Chapter 3 (2.BIOS Setup
Utility (SETUP))
for BIOS Setup Utility.
Advanced
Processor Configuration
Processor Information
[CPU ID]
[L2 Cache RAM]
[L3 Cache RAM]
1.6.2
Replacement / Removal
To remove processor (CPU), reverse the installation procedure.
Important
Do not remove any processor unless it is failed.
To remove the heat sink from the processor, first turn the heat sink to the left and
right lightly to make sure that the heat sink can be apart from the processor.
Removing the heat sink with it adhering to the processor may cause the
processor and/or CPU socket to be defected.
