![background image](http://html1.mh-extra.com/html/nec/express5800-e120d-1/express5800-e120d-1_user-manual_3946351087.webp)
2. Installation and Connection
Express5800/E120d-1 User’s Guide
87
Chapter 2 Preparations
(2) Removal procedure
Remove the server from the rack in the following procedure.
Important At least two persons are required to remove the server from rack.
1.
Make sure that the server is turned off and then disconnect the power cord or all interface cables from
the server.
2.
Slowly pull the server out while pressing the
buttons located on either side of the front of
the server.
3.
Because there are stoppers, the server will
come to a stop halfway. Press and hold Rail
Stopper on the rails and pull the server out
of the rack.
Important Be careful not to get your fingers caught in the rails or lever.
4.
Hold the server firmly and remove it from the rack.
Important
While more than one person is supporting the bottom part of the server,
slowly pull out the server.
Do not apply pressure on the server from top when it is being pulled out.
Doing so cause the server to drop.
Press the button
to unlock
レールストッパー
Rail Stopper