![background image](http://html1.mh-extra.com/html/nec/express5800-e120d-1/express5800-e120d-1_user-manual_3946351062.webp)
1. Installing Internal Optional Devices
Express5800/E120d-1 User’s Guide
62
Chapter 2 Preparations
1.8.2
Supported boards and available slots
The following tables list supported boards and slots available for them. For details of the features of each
board, refer to the manual supplied with it.
: Can be mounted, –: Cannot be mounted
*1 Data transfer rate of PCI slot = Transfer bandwidth
Number of lanes
<Example> x8 lane = 64 Gbps (one-way)
*2 Connector size. Cards exceeding the number of sockets cannot be connected.
<Example> x4 socket can connect with x1 and x4 cards, but not x8 card.
*3 Use RS-232C cable (B).
* For details of functions of each card, refer to the Technical Guide.
* The card performance described in the parentheses after the Product name indicates the maximum operation performance of the card.
Slot number
PCIe 3.0 #1
PCIe 3.0 #2
PCI slot performance *1
x8 lane
x8 lane
Socket type *2
X16 socket
x8 socket
Transfer bandwidth
(per lane) *1
8 Gb/s
Slot size
Low Profile
Product
number
Product
name
Available card size
180 mm max.
Remarks
N8103-149
RAID Controller (512 MB, RAID 0/1)
(PCI EXPRESS 2.0 (x8))
–
N8103-150
RAID Controller (512 MB, RAID 0/1/5/6)
(PCI EXPRESS 2.0 (x8))
–
Dedicated to connecting internal hard disk
drive.
Additional battery N8103-154 can be
mounted.
N8103-151
RAID Controller (1 GB, RAID 0/1/5/6)
(PCI EXPRESS 2.0 (x8))
–
Dedicated to connecting internal hard disk
drive.
Additional battery N8103-154 can be
mounted.
MegaRAID CacheCade N8103-156 can be
mounted.
N8103-152
RAID Controller(1 GB, RAID 0/1/5/6)
(PCI EXPRESS 3.0 (x8))
-
Dedicated to connecting internal hard disk
drive.
Flash BackUp Unit is mounted as standard.
N8103-160
RAID Controller (1 GB, RAID 0/1/5/6)
(PCI EXPRESS 2.0 (x8))
Dedicated to connecting external devices.
Additional battery N8103-162 can be
mounted.
Up to two additional batteries can be
mounted.
N8103-142 SAS
Controller
(PCI EXPRESS 2.0 (x8))
Dedicated to connecting external devices.
N8190-153
Fibre Channel Controller
(8 Gbps/Optical)
(PCI EXPRESS 2.0 (x8))
Dedicated to connecting external Fibre
Channel devices.
N8190-154
Fibre Channel Controller (2ch) (8
Gbps/Optical)
(PCI EXPRESS 2.0 (x8))
Dedicated to connecting external Fibre
Channel devices.
N8104-138
1000BASE-T Adapter (1ch)
(PCI EXPRESS 2.0 (x1))
For additional LAN port.
Card type: PCI Express 2.0(x4)
N8104-132
1000BASE-T Adapter (2ch)
(PCI EXPRESS 2.0 (x1))
For additional LAN port.
Card type: PCI Express 2.0(x4)
N8104-133
1000BASE-T Adapter (4ch)
(PCI EXPRESS 2.0 (x2))
For additional LAN port.
LAN cable with modular cover
cannot be used.
N8104-128 10GBASE
Adapter
(SFP+/2ch)
(PCI EXPRESS 2.0 (x8))
For additional LAN port.
Prepare SFP module N8104-129 if needed.
Up to one in RHEL6.
N8104-131
10G Converged Network Adapter
(2ch)(10Gbps/Optical)
(PCI EXPRESS 2.0 (x8))
For additional DCB/FCoE.
SFP+ module has been attached to the
server.
FC bus redundancy is supported by
StoragePathSavior.
Teaming/bonding with LAN is not available.
As LAN of N8104-131, use, in 1 system, only
1 port.
N8117-01A
Additional RS-232C connector kit *3
For additional serial port B (RS-232C)