4. Names and Features of Component
Express5800/53Xi, Y53Xi User's Guide
46
Chapter 1 General Description
When you fail to eject
4.6.3
If you fail to eject the optical disk tray with the Eject button, follow the procedure below.
1. Press the POWER/SLEEP switch to power off the workstation. (The POWER/SLEEP LED goes off.)
2. Insert a metal pin of approximately 1.2 mm in
diameter and 100 mm in length (a straightened large
paper clip will make a substitute) into the eject hole on
the optical disk drive and gently push it in until the tray
is ejected. The location of eject hole is subject to
change depending on the drive type.
Note
•
Do not use a toothpick or plastic stick that is easy to break.
•
If the above procedure does not let you take out the optical disk, contact your sales
representative.
3. Hold the tray and pull it out.
4. Take out the optical disk.
5. Push the tray back into position.
Data loss
4.6.4
NEC assumes no liability for data loss due to malfunction of the optical disk drive.
Eject hole
