4. Names and Features of Component
Express5800/53Xi, Y53Xi User's Guide
45
Chapter 1 General Description
Setting/removing media
4.6.2
1. Make sure that the power of the workstation is on (with the POWER/SLEEP LED being lit in green) before
setting/removing the optical disk on the optical disk drive.
2. Press the Eject button on the front of the optical disk drive.
The tray comes out.
3. Put the optical disk on the tray with the label printed surface facing upward.
4. Push the front of the tray lightly to retract it into the drive.
Tips
If a noisy sound in driving the optical disk drive occurs after setting an optical disk, set it
again correctly.
To take out the optical disk from the optical disk drive, press the Eject button in the similar way in setting the
optical disk to make the tray go out. Then, remove the optical disk from the tray.
Tips
Eject button is disabled while the media in the drive is being accessed (Access LED is lit).
Some OS command can eject the tray.
After taking out the optical disk, return the tray into the drive.
