ftSMC Component Properties
ftSMC Component Properties and Actions
3-9
IDPROM: ModelName
This type of PROM, located on boards manufactured by NEC
Solutions (America), contains board identification information.
IDPROM: SerialNumber
This type of PROM, located on boards manufactured by NEC
Solutions (America), contains board identification information.
Internet Call-in Poll Interval
The interval, specified in seconds, that the SMM waits between
polling Hub machines to find out if call-in over the Internet is
needed. The default value is 300 seconds (5 minutes).
Internet Corruption Re-send
Count
The number of re-send attempts ftServer Manager will make before
removing the alarm, when an Internet corruption error is received
while sending alarms by Internet only.
Internet HTTP Proxy Address
A list of the HTTP proxy server addresses (host:port) that ftServer
Manager uses to send alarm messages over the Internet in a
space-delimited string (for example, myproxy1:8080
myproxy2:8080). Set to empty if no proxy is required.
Internet HTTP Proxy
Password
The password to access the proxy server.
Internet HTTP Proxy User
Name
The user name to access the proxy server.
Internet HTTP Server Address
The HTTP server address (host:port) that ftServer Manager uses to
send alarm messages over the Internet. The host name may be
either a domain name (for example, www.necsam.com) or an IP
address in ASCII dotted-decimal format (for example,
192.52.248.194). The port number is optional (by default, HTTP is
80 and HTTPS is 443).
Internet Tunnel Server
Address
Tunnel server address (<
host
>) that SMM uses for dial-in over the
Internet. The host name may be either an FQDN
(
inettunel.ecacsupport.com
) or a dotted-decimal IP
(134.111.1.21). This address should be equal to the CN field of the
Web server certificate (use
inettunel.ecacsupport.com
by
default).
IsPrimary
Identifies the primary VTM.
LastGoodDump
For systems equipped with VTMs. Specifies the memory dump
number of the last known good dump.
LED State: Yellow
LED State: Red
LED State: Green
LED State: White
Indicates the state of an LED in the system (On, Off, NotPresent, or
Cycle). See the operation and maintenance guide for your system
for a description of the meanings of the LEDs.
Table 3-1. ftSMC System Inventory Component Properties (Continued)
Property
Description
Содержание Express5800/320Ma
Страница 1: ...NEC Solutions America Inc NR550 Express5800 320Ma Technical Reference Guide...
Страница 10: ...Preface x Express5800 320Ma Technical Reference Guide...
Страница 24: ...ASN Connection Retry Cycle 2 10 Express5800 320Ma Technical Reference Guide...
Страница 52: ...ftSMC Component Actions 3 28 Express5800 320Ma Technical Reference Guide...