ftSMC Component Properties
3-12
Express5800/320Ma: Technical Reference Guide
ModelDescription or
ModelDesc
The VTM board description.
ModelName
The Express5800/320Ma system name as stored in the system ID
PROM. For VTMs, the VTM OEM product number.
Modem Check Interval
The number of seconds that the system waits between checking
that the modem attached to the system is functional and checking
that a dial tone exists on the phone line. If this value is set to zero,
modem checks are disabled. The default is 3600 seconds (1 hour).
Modem Country Code
Telephone calling code for the country where the modem is located
(for instance, 1 = USA, 44 = United Kingdom). Select the country
from the drop-down list.
Modem Post-Init Commands
Contains additional modem initialization string commands that are
sent to the SMM modem after the default initialization string is sent.
Modem Pre-Dial Commands
Contains additional modem dial commands that are sent to the
SMM modem immediately prior to the sending of a dial command.
MTBF: Current
Current MTBF in seconds. A value of unknown (0) indicates that the
device has not failed enough times for an MTBF to have been
calculated.
MtbfFaultLimit
Defines the number of times certain errors can occur before the
system sends threshold events that generate alarms.
MTBF: NumberOfEvents
Total number of faults for a component.
MTBF: Threshold
Threshold, in seconds, below which the component will not be
automatically brought back into service when it fails. The default is
600 seconds, and the range is 600 seconds to 4,294,967,295
(2
32
-1) seconds.
MTBF: TimeOfLastEvent
Date and time of the last fault on a component.
MTBF: TimeOfLastFault
Time at which the device last failed.
MTBF: Type
Defines how the threshold value is used when a device fails.
Normally Type is set to Use Threshold, which indicates that the
threshold value is used to determine whether to automatically bring
the device back into service. The NEC Technical Support can set it
to Never Restart or Always Restart.
Name
In ASN, the name or designation of each ASN Configuration node.
In relation to the SATA embedded adapter, defines the label by
which the object is known. When subclassed, the Name property
can be overridden to be a Key property.
Table 3-1. ftSMC System Inventory Component Properties (Continued)
Property
Description
Содержание Express5800/320Ma
Страница 1: ...NEC Solutions America Inc NR550 Express5800 320Ma Technical Reference Guide...
Страница 10: ...Preface x Express5800 320Ma Technical Reference Guide...
Страница 24: ...ASN Connection Retry Cycle 2 10 Express5800 320Ma Technical Reference Guide...
Страница 52: ...ftSMC Component Actions 3 28 Express5800 320Ma Technical Reference Guide...