ftSMC Component Properties
ftSMC Component Properties and Actions
3-11
LunFlushInterval
Interval, in minutes, between flushes of the disk write cache. Default
is 0, disabled.
LunVerifyInterval
Specifies the frequency with which information on physical disks
that are configured as mirrors in an RDR virtual disk are compared
to each other. Default: 10800 minutes (7 days)
MachineCheckThreshold
Sets the threshold number of errors that sends a Correctable
Machine Check call-home message. The system keeps a record of
the number of Correctable Machine Check errors detected per CPU
element and whether the threshold has been exceeded. Look at
individual processors to see which ones are experiencing problems.
Manufacturer
The manufacturer of the device.
MCA Info:
ThresholdExceeded
Indicates if the configured error threshold for Correctable Machine
Check errors, has been exceeded.
Medium Idle Re-send Count
The number of re-send attempts, separated by
Medium Idle Time
Between Re-sends
, that ftServer Manager will make before moving
to the long idle interval.
Medium Idle Time Between
Re-sends
The medium idle time, in seconds, between attempts to re-send an
alarm. After a number, defined by
Short Idle Re-send Count
, of
unsuccessful attempts to send an alarm message, ftServer
Manager waits this long before it attempts to re-send the alarm.
After a number of unsuccessful attempts, defined by
Medium Idle
Re-send Count
, ftServer Manager will wait the amount of time
defined by
Long Idle Time Between Re-sends
before attempting to
re-send the alarm message.
Member Status
Identifies whether a system is a member of an ftGateway group or
not, and if it is a member, whether it is a gateway or slave machine.
The default value is Non-member.
Member Status Confirm
Provides feedback on the
Join ftGateway Group
action, which is
described in
Table 3-2
. It is set to Confirm Pending after executing
the
Join ftGateway Group
action. It is then set based on the
feedback status from the gateway adapter. The default value is Not
Applicable.
MemCheckRate
Sets the rate at which the driver checks memory. The rate is a
number from 0 to 9, where 0 is the slowest rate and 9 is the fastest.
The default is 5. See
Perform Memory Check
, which is described
in
Table 3-2
.
Messages[n]
Contains the text displayed on the front panel LCD.
Model
The device’s model number.
Table 3-1. ftSMC System Inventory Component Properties (Continued)
Property
Description
Содержание Express5800/320Ma
Страница 1: ...NEC Solutions America Inc NR550 Express5800 320Ma Technical Reference Guide...
Страница 10: ...Preface x Express5800 320Ma Technical Reference Guide...
Страница 24: ...ASN Connection Retry Cycle 2 10 Express5800 320Ma Technical Reference Guide...
Страница 52: ...ftSMC Component Actions 3 28 Express5800 320Ma Technical Reference Guide...