NEC EXPRESS5800/120MF, Руководство пользователя

Страница: 239 / 346

Troubleshooting 6-25
[Complete] does not appear on [Role of Computer] screen.
– [Complete] does not appear if the Setup File that has already been created is loaded.
– [Complete] appears only when you first enter the [Role of Computer] screen.
Once you go to the next screen from [Role of Computer], [Complete] will not appear even
if you enter [Back] to go back to the [Role of Computer] screen.
Select [Use Existing Partition] at [System Partition], but the OS is installed in the whole area of the
disk.
– Is there any other partition than the partition to re-use (excluding maintenance area)? If the
partition other than the one to re-use does not exist, the setup will reserve the whole area of
the disk to install Windows 2000.
Specified to join the Domain, but the system is installed as Workgroup.
– When the setup fails to join the Domain during the installation, it will install the system as
Workgroup. Open [System] in Control Panel and click [Network Identification] to specify
joining the Domain.
Specified large value as partition size, but when Windows 2000 is actually started, the system
partition is created by 2000MB.
– Is the [Partition Size] specified a value larger than the real area? If you want to create one
partition in the whole area of the hard disk (excluding the maintenance area) to install the
OS, specify [All Area].
Windows 2000 started with different display resolution from the specified value.
– If the specified display resolution cannot be used, the system will use the nearest value or
the default value of the driver.
Entered the incorrect Product ID/CD key.
– Even if you entered the incorrect Product ID/CD key, Express Setup will start. However,
the setup will stop and asks you to re-enter the correct value. Also in this case, input
request will occur when rebooting after GUI setup completed during Express Setup. If
these 2 inputs are done correctly, there is no problem on Windows 2000 setup.
Unable to specify the details of Network adapter.
– In Express Setup, you cannot specify the details of Network adapter. Specify them from
the Control Panel after starting Windows 2000.
Windows 2000 is started with Network adapter that has not been specified during Express Setup
– Windows 2000 will install the recognized Network adapter specified as default value. If
you want to modify the specification, it can be done from the Control Panel after starting
Windows 2000. Also, the Network adapter that has been specified during Express Setup
but that is not connected will not be setup, though the protocol will only be installed.