manualshive.com logo in svg

NEC Express5800/120Lj, Руководство пользователя

Поделиться
Скачать
NEC Express5800/120Lj Скачать руководство пользователя страница 210

7-2  Maintenance

CLEANING

Clean the server on a regular basis to keep the server in a good shape.

WARNING

Observe the following instructions to use the server safely. Failure to follow
these instructions may result in death or serious personal injury. See pages
1-3 to 1-8 for details.

„

 

Do not disassemble, repair, or alter the server.

„

 

Do not look into the optical disk drive.

„

 

Do not remove the lithium battery.

„

 

Disconnect the power plug before working with the server.

CAUTION

Observe the following instructions to use the server safely. Failure to follow
these instructions may cause a fire, personal injury, or property damage. See
pages 1-3 to 1-8 for details.

„

 

Avoid installation in extreme temperature conditions.

„

 

Make sure to complete board installation.

„

 

Protect the unused connectors with the protective cap.

Содержание Express5800/120Lj















































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды