![background image](http://html.mh-extra.com/html/nec/express5800-110ei/express5800-110ei_user-manual_251177188.webp)
8-8 Troubleshooting
POST Error Messages
When POST detects an error, it displays an error message on the display unit screen. The
following table lists error codes, error messages, and actions to take.
IMPORTANT:
Take a note on the messages displayed before
consulting with your sales agent. Alarm messages are useful
information for maintenance.
Error
code
Error message
Recommended Action
0200
Failure Fixed Disk.
Contact your service representative.
0210
Stuck Key.
Disconnect the keyboard and connect it again.
0213
Keyboard locked - Unlock key
switch.
Release the lock of the key switch. If the error cannot
be corrected in spite of the release of the lock, contact
your service representative.
0220
Monitor type does not match CMOS
- Run SETUP.
Start the SETUP. If the error cannot be corrected in
spite of the start of SETUP, contact your service
representative.
0230
System RAM Failed at offset.
0231
Shadow Ram Failed at offset.
0232
Extended RAM Failed at address
line.
Contact your service representative.
0250
System battery is dead - Replace
and run SETUP.
Contact your service representative to replace the
battery. (After restarting the computer, start the
SETUP to provide the setting again.)
0251
System CMOS checksum bad -
Default configuration used.
The default values have just been set. Start the
SETUP to provide the setting again. If the error
cannot be corrected, contact your service
representative.
0252
Password checksum bad -
Passwords cleared.
The password has just been cleared. Start the
SETUP to provide the setting again.
0260
System timer error.
0270
Real time clock error.
0271
Check date and time setting.
Start the SETUP to set the date and time again. If the
same error occurs successively in spite of the resetting,
contact your service representative.
02B0
Diskette drive A error.
Start the SETUP to set the "Legacy Floppy A" in the
Main menu again. If the same error occurs
successively in spite of the resetting, contact your
service representative.
02B2
Incorrect Drive A type - run SETUP. Start the SETUP to provide the setting again. If the
error cannot be corrected, contact your service
representative.
02D0
System cache error - Cache
disabled.
The cache cannot be used. Contact your service
representative.
Содержание Express5800/110Ei
