NEC Express5800/110Ei, Руководство пользователя, Страница: 39 / 314

General Description 2-11
AC LINK Feature
When the power cord of the server is connected to an uninterruptible power supply (UPS) unit, the
server supports the power linkage feature that enables control over the power supply from the UPS
to the server. The AC LINK feature can be enabled or disabled with Power Management Setup in
the Server menu of the BIOS setup utility, "SETUP." (See Chapter 4.)
Security
The BIOS setup utility provides a number of security features to prevent unauthorized or accidental
access to the system. Once the security measures are enabled, access to the system is allowed only
after the user enters the correct password(s). For example:
„
Set and enable an administrative password.
„
Set and enable a user password
„
Check the user account when entering the BIOS setup utility or booting the system.
NEC EXPRESSBUILDER
The CD-ROM that comes with your server contains a setup utility called "NEC
EXPRESSBUILDER." When you have first installed the server or append features to the server,
use the NEC EXPRESSBUILDER to set up your server.
Refer to Chapter 6 for details.
IMPORTANT:
Do not use the NEC EXPRESSBUILDER for any
other computers than the server, nor other NEC Express5800 series
servers than the one that NEC EXPRESBUILDER is provided for. Not
following this instruction may cause failures.
The major functions of the NEC EXPRESSBUILDER are:
„
To install the OS.
It installs an operating system.
„
To diagnose the system.
It diagnoses the server.
„
To create a support disk.
It copies utilities in the NEC EXPRESSBUILDER CD-ROM into a floppy disk to launch
them from the floppy disk.
„
To update the BIOS
It updates the BIOS features of the server.