NEC Express5800/110Ei, Руководство пользователя, Страница: 206 / 314

8-26 Troubleshooting
6.
Insert Windows 2000 OEM-DISK for NEC EXPRESSBUILDER into the floppy disk
drive and press
Enter .
Please insert the disk labeled
manufacturer-supplied hardware support disk
into Drive A:
* Press ENTER when ready.
7.
Select the proper SCSI Adapter and press Enter .
„
INITIO INI-A10XU2W SCSI Host Adapter (When N8103-65F board is installed.)
„
MegaRAID SCSI 320-1 Controller Driver (When N8103-80F board is installed.)
„
Adaptec Ultra320 SCSI Cards (Win2000) When N8103-75F board is installed.)
„
Windows Promise FastTrak S150 SX4 (tm) Controller (When N8103-78F board is
installed.)
„
Adaptec Embedded Serial ATA HostRAID Controller (When HostRAID is installed.)
8.
Press R to select the recovery option.
9.
Select the keyboard.
10.
If you are requested, press R to select system recovery procedure.
11.
If you are requested, select either of the procedure below:
[Manual Recovery] (Press M )
Do not select this option unless you are a high-level user or a system administrator.
If you use this option, you can recover the problems of system files, partition boot
sector, and start-up environment.
[Quick Recovery] (Press
F
)
This option is very easy to use and the user does not need to do anything during the
procedure. If you select this option, the system recovery disk program starts to
recover the problems concerning system files, partition boot sector of system disk,
and start-up environment (if multiple operating systems are installed on the system).
12.
Follow the instruction displayed on the screen, and then press
L
at the screen which
request you to insert system recovery disk. The system will be restarted once.
NOTE:
Starts the procedure without system recovery disk.