NEC Express 5800 120Eg, Руководство пользователя

Страница: 53 / 292

120Eg User Guide - Setting Up the System
2 - 7
Selecting Server Site
Read the following precautions before selecting a suitable site for your server. The
following describes installation of the server and connections to the server.
Caution
Observe the following instructions to use the server safely. Fail-
ure to follow these instructions may cause a fire, personal injury,
or property damage. See
“Safety Notices” on page 1-xviii for
details.
■
Never attempt to lift the server only by yourself.
■
Do not install the server in any place other than specified.
When you have selected a server site, hold the server by its bottom with at least three
persons and carry it to the site, then place it slowly and gently.
Caution
Do not hold the server by its front door to lift the server. The
front door may be disengaged and damage the server.
Do not install the server in the following locations as it may cause malfunctions of the
server.
■
Places with drastic changes in temperature (e.g., near a heater, air conditioner, or
refrigerator)
■
Places with strong vibration
■
Places with corrosive gas in presence, near chemicals, or with possibilities of
chemicals sprayed over
■
On a non-antistatic carpet
■
Places with possibilities of falling objects
■
Places where a power outlet that shares the ground line with another (especially the
one to which a device with large power consumption is connected) must be used
for the server
■
Do not install the server near equipment that generates power noise (e.g., contact
spark at power-on/power-off of commercial power supply through a relay). (To
install the server near equipment that generates power noise, ask your sales agent
for separating the power wiring or installing a noise filter.)