NEC Express 5800 120Eg, Руководство пользователя

Страница: 243 / 292

120Eg User Guide - Appendix D
D - 18
Installing Maintenance Utilities
Various maintenance utilities are contained in your NEC EXPRESSBUILDER CD-
ROM. See Chapter 6 for installing the utilities to your server or management
workstations.
Updating the System
Update the system in the situation below:
■
Modified system configuration.
■
Recovered the system using recovery process.
Log on to the system with the account that has administrative authority (e.g.
Administrator) and insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM
drive of the server.
[Setup Software] in [Master Control Menu] screen appears, so left-click the item.
Click [Update the System] from the menu and the setup will start. After that, follow
the message to continue the setup process.
Making Backup Copies of System Information
The system information includes the current BIOS settings and any specific
information for the server.
Save the information after completing the system setup.
Without the backup data, you will not be able to recover the information.
You can save the information by the following process.
1. Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive and
reboot the system.
2. Select [Tools].
3. Select [Off-line Maintenance Utility].
4. Select [System Information Management].
5. Insert a floppy disk into the floppy disk drive.
6. Select [Save].
Exceptional Setup
This section explains how to setup with the exceptional way. You usually do not have
to do as follows. If your system has any Mass storage devices, you have to set as
follows depending on your system. The detailed information is provided by the manual
of the Mass storage device.
Installation of Mass storage device not to be supported by ExpressSetup
If you would like to install or re-install the OS when the system has new mass storage
device not to be supported by NEC EXPRESSBUILDER, you have to set as follows.