NEC Express 5800 120Eg, Руководство пользователя

Страница: 71 / 292

120Eg User Guide - Setting Up the System
2 - 25
5. If you set a password using the BIOS SETUP utility, the password entry screen
appears upon successful completion of POST.
Up to three password entries will be accepted. Three incorrect password
entries disable the server to boot. In such a case, turn off the power and wait
about ten seconds before turning on to boot the server.
Caution
Do not set a password before installing an OS.
6. The OS starts when POST completes.
POST Error Messages
When POST detects an error, it displays an error message on the display unit screen.
See
“POST Error Messages ” on page 5-41
.
Caution
Take a note on the messages displayed before consulting with
your sales agent. Alarm messages are useful information for
maintenance.
Power Off
Follow the procedure below to power off the server. If the power cord of the server is
connected to a UPS, refer to the manual that comes with the UPS or the manual for the
application that controls the UPS.
Caution
Always allow POST to complete before turning off the server.
1. Shut down the OS.
2. Press the POWER switch on the front of the server.
The POWER/SLEEP lamp goes off.
3. Power off peripheral devices.
SLEEP Switch
You can use the POWER switch as the SLEEP switch if the ACPI compliant operating
system is installed in your system.