6. System BIOS Setup (Description of SETUP)
Scalable Modular Server DX2000 User’s Guide
76
Chatpter 3 Setup
6.4
Cases that require configuration
Only if a case applies to any of following cases, use the SETUP utility to change the factory settings of the
relevant parameter. Other than cases described below, do not change the settings. A list of SETUP parameters
and factory settings are described in
Chapter 2 (1. Server Module BIOS)
in DX2000
Maintenance Guide
.
Category
Description
To be changed
Remark
Basic
Change date and time
Main
System Date
Main
System Time
Configurable on OS
Enable NumLock when
the power is turned on.
Set [Boot] - [Bootup Numlock State]
to [On].
Boot
Set the boot mode to the
UEFI mode according to
the OS used.
Set [Boot] – [Boot Mode] to [UEFI].
Intended for the following OS
ー
Red Hat Enterprise Linux 7
(x86_64)
Refer to the manual that comes
with the OS.
Change the boot order of
devices
Boot
Boot Option Priorities
Change the boot priority
Security
Restrict configuration of
SETUP by using a
password.
Security
Administrator
Password
Enter a password
Security
User Password
Enter a password
If a password is set, a
message to enter the
password is displayed at the
next time SETUP is
launched.
Содержание DX2000
Страница 108: ...MEMO...
Страница 109: ...MEMO...
