manualshive.com logo in svg

NEC DIRECTION T, Руководство пользователя

Поделиться
Скачать
NEC DIRECTION T Скачать руководство пользователя страница 78

    

 4-20   System BIOS and Utilities

4. 

If the message “User Password Is Set” (or “Supervisor
Password Is Set”) appears in the Security Menu, the
password has been set up successfully.

 

!

WARNING

 If the User Password Is Clear field (or Supervisor
Password Is Clear) appears in the Security Menu,
the corresponding password feature is disabled.
(Your system is not password protected.)

How to Disable Password Protection

1. 

From the Security Menu, highlight the “Set User
Password” or “Set Supervisor Password” field
(depending on which password you’re disabling).  

2. 

Type your password in the Enter Current Password
field, then press the 

Enter

 key.

3. 

Don’t type anything in the Enter New Password
field — just press the 

Enter

 key.

4. 

Again, don’t type anything in the Confirm New
Password field — just press the 

Enter

 key.

 If the message “User Password Is Clear” (or “Supervisor
Password Is Clear”) appears in the Security Menu, the User
(or Supervisor) password feature is disabled.

 Press the right arrow (cursor) key to move to the Power
Menu.

Power Menu

 The Power Menu can be used to enable or disable the
system’s power management features. When the power
management option is enabled, the Power Menu displays
the options shown in the following screen.   

Содержание DIRECTION T










































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды