manualshive.com logo in svg

NEC DIRECTION T, Руководство пользователя

Поделиться
Скачать
NEC DIRECTION T Скачать руководство пользователя страница 167

    

 Limited Warranty   B-3

HOW YOU CAN GET WARRANTY SERVICE

Year One

 For the first year, NECCSD provides an on-site limited
warranty for your NECCSD computer.

 Such on-site warranty service may be obtained by calling
1-888-632-2678. You may also obtain warranty service in
the same manner as the procedure for years two and three,
below.

Years Two and Three

 To obtain warranty service during years two and three of
the warranty terms, you must return this product to
NECCSD for repair. It shall be your obligation and expense
to ship the product, freight prepaid, or to deliver it to a
facility authorized by NECCSD to render the warranty
services, in either the original package or a similar package
affording an equal degree of protection. Call
1-888-632-2678 for a correct return address.

 NOTE: All products returned to NECCSD for service
MUST have prior approval; this may be obtained by calling
the above number.

Содержание DIRECTION T










































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды