manualshive.com logo in svg

NEC DIRECTION T, Руководство пользователя

Поделиться
Скачать
NEC DIRECTION T Скачать руководство пользователя страница 192

    

 D-10   System Board, Connectors, and Error Messages

 Message

 Keyboard locked  - Unlock key switch.

 Cause

 The keyboard is locked.

 Solution

 Unlock the system to proceed.

 

 

 Message

 Parity Check 1.

 Cause

 Parity error found in the system bus. BIOS
attempts to locate the address and display it
on the screen. If it cannot locate the address, it
displays 

????.

 

 

 Message

 Parity Check 2.

 Cause

 Parity error found in the I/O bus. BIOS
attempts to locate the address and display it
on the screen. If it cannot locate the address, it
displays 

????.

 

 

 Message

 Real time clock error.

 Cause

 The real time clock failed BIOS test.

 Solution

 This malfunction may require board repair.

 

 

 Message

 Shadow RAM failed at offset: 

nnnn.

 Cause

 Shadow RAM failed at offset: 

nnnn of the 64K

block at which the error was detected.

 

 

 Message

 

nnnn Shadow RAM Passed.

 Cause

 A total of

 nnnn shadow RAM in kilobytes

tested good.

 

 

 Message

 System BIOS shadowed.

 Cause

 The system BIOS was copied to shadow RAM.

 

 

Содержание DIRECTION T










































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды