NEC C551Q Скачать руководство пользователя

Страница: 8 / 59

English-6

Mounting location

• The ceiling and wall must be strong enough to support the

monitor and mounting accessories.

• DO NOT install in locations where a door or gate can hit

the unit.

• DO NOT install in areas where the unit will be subjected

to strong vibrations and dust.

• DO NOT install the monitor next to a location where the

main power supply is fed into the building.

•

DO NOT install the monitor in a location where people
can easily grab and hang onto the unit or the mounting
equipment.

•

Allow for adequate ventilation or provide air conditioning
around the monitor, so that heat can properly dissipate
away from the monitor and from the mounting equipment.

Mounting on ceilings

• Ensure that the ceiling is sturdy enough to support the

weight of the unit and the mounting equipment over time,

against earthquakes, unexpected vibrations, and other
external forces.

• Be sure the unit is mounted to a solid structure within

the ceiling, such as a support beam. Secure the monitor
using bolts, spring lock washers, washer and nut.

• DO NOT mount to areas that have no supporting internal

structure. DO NOT use wood screws or anchor screws for
mounting. DO NOT mount the unit to ceiling or to hanging

fixtures.

Maintenance

• Periodically check for loose screws, gaps, distortions,

or other problems that may occur with the mounting
equipment. If a problem is detected, please refer to
qualified personnel for service.

• Regularly check the mounting location for signs of

damage or weakness that may occur over time.

Orientation

• When using the monitor in the portrait position, it should

be rotated clockwise so that the left side is moved to
the top, right side is moved to the bottom. This will allow

for proper ventilation and will extend the lifetime of the

monitor. Improper ventilation may shorten the lifetime of
the monitor.

LED Indicator

Changing NEC logo ornament position

When using the monitor in the portrait position, the NEC logo
ornament position can be changed.

Removing the logo ornament: unscrew the installed screw
then take off the logo ornament.

Attaching the logo ornament: adjust the protrusions inside of
the logo ornament into the protrusion hole

on the bezel. Make

sure the hole for the screw on the logo ornament and the
hole for the screw on

the bezel are aligned.

Install the logo

ornament with the screw, which is used for installing the logo
ornament.
(Recommended Fasten Force: 30-40N

•

cm).

Inside of NEC logo ornament

Screw hole

Protrusions

Screw hole

Protrusion hole

CAUTION:

Do not use any other screw to install the logo

ornament.

Содержание C551Q




























































Результаты поиска

Содержание C551Q

Отзывы:

Похожие инструкции для C551Q

Бренды по названию

Популярные бренды

NEC C551Q, Руководство пользователя

Результаты поиска

Содержание C551Q

Отзывы:

Похожие инструкции для C551Q

Бренды по названию

Популярные бренды