English-48
Supporting HDMI CEC command
OSD menu
HDMI CEC command name
Explanation
Setting
CEC
(Consumer
Electronics
Control)
One Touch Play
If HDMI CEC supporting devices are
turned on, the monitor connected to the
devices by HDMI cable is also turned on
automatically. After that, the input switches
to HDMI from an input, which you selected.
If the monitor is turned on when HDMI
CEC devices are turned on, it changes the
input from the original one to HDMI.
To set CEC menus please follow the
steps below.
By using
buttons select
CONTROL > CEC then press
SET/POINT ZOOM button on the CEC.
By using + - buttons select ON then
press SET/POINT ZOOM button on
the ON.
Remote Control Pass
Through
The monitor’s wireless remote control
button operation is functioning to HDMI
CEC supporting devices.
For example, if turn
ing on the monitor by
wireless remote control and pressing the
play button, HDMI CEC supporting devices
will also be turned on and play.
Power Status
Connected HDMI CEC supporting devices
obtains the monitor’s power status, such as
the monitor is in standby mode or on.
System Information
This function obtains the information of a
connected HDMI CEC supported device
(CEC version, Physical Address). In
addition, this function copes with “Change
Language function”.
If the language for the monitor is changed,
the language for a connected HDMI CEC
supported device is changed to the same
language, which is selected for the monitor.
For the “Change Language function”, it is
necessary that the connected HDMI CEC
supported device be able to cope with
multi-language.
AUTO
TURN OFF
System Standby
If the monitor is set to standby using the
wireless remote control supplied with the
monitor, HDMI CEC supported devices
also go into standby at the same time.
If the monitor goes into standby while an
HDMI CEC supported device is recording,
the device is kept on. Please refer to the
user’s manual supplied with the HDMI CEC
supported device for further information.
By using
buttons select
AUTO TURN OFF then press
SET/POINT ZOOM.
By using + - buttons select YES
then press SET/POINT ZOOM button
on the YES.
AUDIO
RECEIVER
System Audio Control
The function sends digital audio signal
through the HDMI cable. Please set an
HDMI CEC audio amplifier between the
monitor and an HDMI CEC supported
device with an HDMI cable.
The Volume button on the wireless
remote control supplied with the monitor
is also controlling the volume of the
connected HDMI CEC audio amplifier.
While this function is active, the internal
speaker is set to MUTE automatically.
By using
buttons select
AUDIO RECIEVER then press
SET/POINT ZOOM.
By using + - buttons select YES
then press SET/POINT ZOOM button on
the YES.
SEARCH
DEVICE
Device OSD Name Transfer This function obtains the connected HDMI
CEC supported device’s name.
By using
buttons select SEARCH
DEVICE then press SET/POINT ZOOM.
By using + - buttons select YES then
press SET/POINT ZOOM button on
the YES.
Routing Control
By selecting a device name, the HDMI
CEC supported device input switches to
the input you selected. After selecting the
device, wireless remote control operation is
functioning for the selected device.
This CEC function supports Feature Abort. We recommend that connecting this monitor to a device supporting HDMI CEC.
Please refer to Connections (See page 14) for HDMI CEC devices connection.
