English-27
English
OSD Settings
INPUT
DisplayPort
Select input signal.
HDMI1
HDMI2
HDMI3
VGA (RGB/YPbPr)
VIDEO
MP
Displays images or movies saved in microSD memory card or USB storage device. Please refer to the Media
Player setting (See page 18).
PICTURE
PICTURE MODE
Select picture mode: [HIGHBRIGHT], [STANDARD], [sRGB], [CINEMA], [CUSTOM1], [CUSTOM2]. See page 25.
BRIGHTNESS
BACKLIGHT
Adjusts the overall image and background brightness. Press + or - to adjust.
NOTE: When MODE1 or MODE2 is selected in ROOM LIGHT SENSING, this function cannot be changed.
BRIGHTNESS*
1,
*
4
Adjusts the image brightness in relationship to the background. Press + or - to adjust.
GAMMA*
1
Select a monitor gamma correction for best picture quality. Selection depends on the desired usage.
NATIVE
Gamma correction is handled by the LCD panel.
2.2
Typical monitor gamma for use with a computer.
2.4
Good for video (DVD, etc.)
COLOR*
1
COLOR*
2,
*
4
E
xcept for VGA
(RGB) input
Adjusts the color depth of the screen. Press + or - to adjust.
COLOR
TEMPERATURE*
2
Adjusts the color temperature of the entire screen. A low color temperature will result in a reddish screen. A high
color temperature will make the screen bluish. If TEMPERATURE needs further adjustment, the individual R/G/B/
levels of the white point can be adjusted. To adjust the R/G/B levels, set CUSTOM as COLOR TEMP selection.
NOTE: Predefined 6500k is set as picture mode, a color temperature of 6500k is predefined so it cannot be
changed.
COLOR CONTROL*
4
Adjusts the hue of the Red, Yellow, Green, Cyan, Blue and Magenta.
HUE*
4
MP, VIDEO inputs only
Adjusts the hue of the screen. Press + or - to adjust.
CONTRAST*
1,
*
4
Adjusts the image brightness in relationship to the input signal. Press + or - to adjust.
SHARPNESS*
2,
*
4
E
xcept for VGA
(RGB) input
Adjusts the crispness of the image. Press + or - to adjust.
ADJUST
AUTO SETUP
VGA (RGB) input only
Automatically adjusts Screen Size, H position, V position,
Clock and Phase.
AUTO ADJUST
VGA (RGB) input only
Please use ON normally. When you select OFF, H Position, V Position and Phase are not adjusted automatically
when new timing is detected.
H POSITION*
3
VGA (RGB), VGA (YPbPr) inputs only
Controls the horizontal position of the image within the Display area of the LCD.
Press + to move right. Press - to move left.
V POSITION*
3
VGA (RGB), VGA (YPbPr) inputs only
Controls the vertical position of the image within the Display area of the LCD.
Press + to move up. Press - to move down.
CLOCK
VGA (RGB) input only
Press + to expand the width of the image on the right of the screen.
Press - to narrow the width of the image on the left.
PHASE
VGA (RGB) input only
Adjusts the visual “noise” on the image.
*1: This function is not available when sRGB is selected at PICTURE MODE.
*2: This function is not available in HDMI/DisplayPort MODE when RGB is selected or when AUTO is selected and the input signal is RGB.
*3: This function is not available when 1:1 is selected as ASPECT.
*4: This function is not available for still image by MP input.