English-17
English
Aspect
For VIDEO, VGA (RGB, YPbPr)
FULL
ZOOM
NORMAL
For DisplayPort
FULL
1:1
ZOOM
NORMAL
For HDMI1, HDMI2, HDMI3
FULL
WIDE
1:1
ZOOM
NORMAL
Aspect ratio
of image
Unchanged view*
3
Recommended selection
for picture aspect*
3
4:3
NORMAL
Squeeze
FULL
Letterbox
WIDE
*
3
Grey areas indicate unused portions of the screen.
NORMAL:
Reproduces the aspect ratio that is sent from the
source.
FULL:
Fills the entire screen.
WIDE:
Expands a 16:9 letterbox signal to fill the entire
screen.
1:1:
Shows the image in a 1 by 1 pixel format.
ZOOM
The image can be expanded beyond the active screen area.
The image which is outside of the active screen area is not
shown.
ZOOM
ZOOM
Power Indicator
LED indicator
status and
lighting pattern
Condition
Recovery
Glowing blue
Normal
1. Turn on the monitor
by the remote
control or the
monitor button.
2. Send an AV signal
input to the monitor.
Blinking green*
1
The monitor has detected no
signal input after a certain
amount of time has passed
when INPUT DETECT is not
NONE, STANDBY USB POWER
is ENABLE, or QUICK TURN
ON is ENABLE.
Glowing amber
The monitor has detected no
AV signal input [with network
signal input] after a certain
amount of time has passed
when INPUT DETECT is NONE,
STANDBY USB POWER and
QUICK TURN ON are ENABLE.
Blinking amber
The monitor has detected no AV
signal input [no network signal
input] after a certain amount of
time has passed when INPUT
DETECT is NONE, STANDBY
USB POWER and QUICK TURN
ON are ENABLE.
Glowing red
Turn off the monitor by the
remote control or the monitor
button.
Turn on the monitor by
the remote control or
the monitor button.
*1: Time setting for AUTO POWER SAVE is available at POWER SAVE
(See page 32).
NOTE:
If the indicator is blinking red in a combination
of long and short, a certain failure might have
occurred, please contact your supplier.
Using Power Management
This LCD monitor follows the VESA approved DPM (Display
Power Management) function.
The power management function is an energy saving
function that automatically reduces the power consumption
of the monitor when the keyboard or the mouse has not been
used for a fixed period.
This allows your LCD monitor to enter a Power Management
mode if the monitor’s POWER SAVE function is set to
ENABLE, and a certain amount of time has passed since the
monitor recognized
“no signal input”. It will increase the life
and decrease the power consumption of the monitor.
NOTE:
Depending on the computer and display card
used, this function may not operate.
After the video signal was lost, the monitor
automatically goes into OFF at a preset time
period.
