manualshive.com logo in svg

NEC Aspire S, Руководство пользователя

Продукт Warner Telecom Group Aspire S имеет бесплатное скачивание быстрого справочного руководства на нашем сайте. Этот руководство поможет вам быстро разобраться с функционалом продукта. Скачайте его сейчас с manualshive.com и наслаждайтесь удобством использования Aspire S.

Поделиться
Скачать
background image

Section 5: Data and SMDR

Aspire S Hardware Manual

Section 5: Data and SMDR

◆

5-7

5

➻

35-02-01 : SMDR Output Options - Toll Restricted Call

Enter 1 if you want the SMDR report to include calls blocked by Toll Restriction.  Enter 0 to exclude 
blocked calls.

➻

35-02-02 : SMDR Output Options - PBX Calls

If system is behind a PBX, enter 1 to have SMDR include all calls to the PBX.  Enter 0 to have SMDR 
include only calls dialed using PBX trunk access code.

➻

35-02-03 : SMDR Output Options - Display Trunk Name or Number

Select whether the system should display the trunk name (0) or the number (1) on SMDR reports. 

If 

this option is set to “1”, Program 35-02-14 must be set to “0”.

➻

35-02-04 : SMDR Output Options - Daily Summary
35-02-05 : Weekly Summary and
35-02-06 : Monthly Summary

Enter 1 to enable a summary report.  Enter 0 to disable a summary report. The daily report prints every 
day at midnight.  The weekly report prints every Sunday night at midnight. The monthly report prints at 
midnight on the last day of the month.

➻

35-02-08 : SMDR Output Options - Incoming Calls

Enter 0 if you want the SMDR report to include incoming calls. Enter 1 if you want the SMDR report 
to exclude incoming calls.

➻

35-02-09 : SMDR Output Options - Print Name or Number

Enter 0 if you want the SMDR report to include the extension’s name. Enter 1 if you want the SMDR 
report to include the extension’s number.

➻

35-02-10 : SMDR Output Options - All Lines Busy (ALB) Output

Enter 1 to report information when all lines in a group are busy and an extension user tries to access the 
group. Enter 0 if this information should not be included.

➻

35-02-12 : SMDR Output Options - DID Table Name Output

Determine if the DID table name should be displayed for incoming DID calls (0=Not Displayed, 
1=Displayed).

➻

35-02-13 : SMDR Output Options - CLI Output When DID to Trunk

Determine if the Caller ID should be displayed when the incoming DID number is transferred to an 
outgoing trunk (0=Not Displayed, 1=Displayed).

➻

35-02-14 : SMDR Output Options - Date

Determine whether the date should be displayed on SMDR reports (0=not displayed, 1=displayed).

 

This option must be set to “0” if the trunk name is set to be displayed in Program 35-02-03.

➻

35-02-15 : SMDR Output Options - CLI/DID Number Switching

Enter 0 to display the Caller ID number. Currently, option “1” for the DID number is not available. 
With software 4.0E+, determine if the Caller ID number (0), DID number (1) or Caller ID name (2) 
should be displayed in the SMDR output.

➻

35-02-16 : SMDR Output Options - Print Trunk Name or Received Dialed Number

Determine how the SMDR should print incoming calls on ANI/DNIS or DID trunks. If set to (1), ANI/
DNIS trunks can print DNIS digits. For DID trunks, if the received number is not de

fi

ned in Program 

22-11-01, then no number will be printed. If set to (0) trunk names are printed instead (as assigned in 
Program 14-01-01).

➻

35-02-17 : SMDR Output Options - Print Account Code or Caller ID Name

Determine whether the Account Code (0) or Caller ID name (1) should appear in the SMDR record. By 
default, the Account Code will be displayed.

Note:

 Program 35-01-08 must be set to "0" for this entry to be followed.

Содержание Aspire S















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Aspire S

D-Link DIR-855L Quick Installation Manual preview
DIR-855L
Бренд: D-Link Страницы: 28
D-Link DIR-826L Quick Install Manual preview
DIR-826L
Бренд: D-Link Страницы: 2
D-Link DIR-655 - Xtreme N Gigabit Router Wireless Quick Start Manual preview
DIR-655 - Xtreme N Gigabit Router Wireless
Бренд: D-Link Страницы: 3
D-Link DIR-605L Technical Support Setup Procedure preview
DIR-605L
Бренд: D-Link Страницы: 11
D-Link DIR-880L Quick Install Manual preview
DIR-880L
Бренд: D-Link Страницы: 12
D-Link DIR-842 Quick Install Manual preview
DIR-842
Бренд: D-Link Страницы: 12
D-Link DIR-821 Quick Install Manual preview
DIR-821
Бренд: D-Link Страницы: 24
D-Link DIR-803 Quick Installation Manual preview
DIR-803
Бренд: D-Link Страницы: 20
D-Link DIR-815/AC Quick Installation Manual preview
DIR-815/AC
Бренд: D-Link Страницы: 44
D-Link DIR-830M Quick Installation Manual preview
DIR-830M
Бренд: D-Link Страницы: 52
D-Link DIR-821 User Manual preview
DIR-821
Бренд: D-Link Страницы: 103
B2 ABB2050 Instruction Manual preview
ABB2050
Бренд: B2 Страницы: 52
Cabletron Systems SmartSwitch Router User'S Reference Manual preview
SmartSwitch Router
Бренд: Cabletron Systems Страницы: 338
Hama 39707 Operating Instruction preview
39707
Бренд: Hama Страницы: 4
FOR-A MFR-4000 Operation Manual preview
MFR-4000
Бренд: FOR-A Страницы: 72
NXP Semiconductors TWR-SB0410-36EVB User Manual preview
TWR-SB0410-36EVB
Бренд: NXP Semiconductors Страницы: 26
H3C S12500R-2L Installation Manual preview
S12500R-2L
Бренд: H3C Страницы: 77
Navini Networks RIPWAVE 40-00460-00R User Manual preview
RIPWAVE 40-00460-00R
Бренд: Navini Networks Страницы: 35

Бренды по названию

Популярные бренды

Загрузить еще бренды