Nebu-tec SaHoMa-II HM-2000-1, Инструкция по эксплуатации

Страница: 22 / 33

38 39
5| Determining the battery capacity and charging the SaHoMa®-II control Determining the battery capacity and charging the SaHoMa®-II control |5
The charging time is a maximum of six hours, depending on the initial capacity.
When the lithium polymer battery of the SaHoMa®-II control unit is fully charged, the multifunctional light will
stay permanently green.
Then disconnect the SaHoMa®-II power cord from the SaHoMa®-II control unit and the 230 VAC power supply.
A fully charged SaHoMa®-II control unit can be used for approx. 2 operating hours.
Caution
To avoid damage to the SaHoMa®-II control unit, only use the supplied original SaHoMa®-II power cord.
Never use a damaged or defective SaHoMa®-II power cord! In this case please contact the manufacturer.
The SaHoMa®-II control unit may only be operated via the internal rechargeable lithium polymer battery, but not
via the SaHoMa®-II power cord and the 230 VAC power supply (socket).
When the lithium polymer battery is fully charged, charging stops automatically to prevent the battery from
„overcharging“. Nevertheless, the SaHoMa®-II control unit should never be left unattended or charged
overnight. If the SaHoMa®-II control unit becomes hot or if there is a build-up of odor, it is essential to
disconnect the SaHoMa®-II control unit from the power supply immediately and to contact the manufacturer to
clarify any further steps.
Tips
To avoid a deep discharge we recommend to recharge the SaHoMa®-II control unit meanwhile, if it is not used
for a longer period of time.
Tips for long-life lithium polymer batteries:
• Hold the lithium polymer battery in an optimal charge state between 30 % and 70 %.
• Do not recharge at a charge level above 70 %.
• Fully recharge at a charge level below 30 %.
• A complete discharge before each recharge is not necessary.
• Do not use or charge the lithium polymer battery intensively in hot or cold conditions;
avoid extreme temperatures.