NDS ConductOR, Руководство пользователя

Страница: 9 / 66

Fixed Inputs Input Signal Notes
S-VIDEO IN A / COMP IN A NTSC or PAL Only one may be selected at a time.
S-VIDEO IN B / COMP IN B NTSC or PAL Only one may be selected at a time.
VGA / SOG VGA or SOG Only one of these signals may be applied.
DVI / RGBS / YPbPr DVI or RGBS or
YPbPr Only one of the signals may be applied. Maximum
resolution is: 1920 x 1080 progressive.
Installation:
ConductOR units may be stacked on a equipment carrier, a surgical cart or mounted in a standard 19” rack.
Do not block the air vents.
Compatible Displays:
1. HD displays with Fiber Optic input.
2. HD displays with a DVI input that accepts signals with 720p or greater resolution.
3. HD displays with HD-SDI or 3G-SDI input.
Control Options:
The ConductOR may be controlled from:
1. Its front LCD touch panel.
2. A PC via the RS-232 port. See page 50 for serial port setup and test details. The
NDS Unified Serial
Commands (P/N 60A0156) document contains a complete set of serial commands for the
ConductOR . Please contact your NDS sales representative for details.
General Information
The ConductOR has 4 fixed inputs as shown in Fixed Inputs table below. Up to 4 input modules and up to 4
output modules may be added. The drawing on page 3 shows location of the fixed input connectors and
the input and output modules. The 24 VDC power out connector provides power, 120 watts maximum, to
an external device. The input and out modules are described on page 5.
ConductOR Overview
2