NDS ConductOR, Руководство пользователя

Страница: 45 / 66

38
ViewOR G2 Setup and Usage
Preparing the ConductOR:
Connect the ConductOR (unit) to your network then connect the network to your PC using Ethernet
cables. Turn the PC and unit on. Connect a compatible signal source to the unit’s DVI 2 input. Connect the
unit’s OUT 1 (see connector panel on page 3) to a compatible display. Finally, on the Home screen (page
9), touch Select Inputs icon.
On the Select Display row touch the Display 1 icon.
Touch the
Change button on the Primary row.
The
Primary Input screen is displayed. Touch the DVI 2 button. An image of the signal applied to DVI 2
should be shown on the connected display.
Continued on the following page.