NCT Group 100T, Руководство оператора

Страница: 137 / 144

14.3 Listing of Global Messages
Error
Code
Message Description
Canceling and Re-
pairing Method
137
3086 DEFINITION ERROR G51 If scaling axis by axis is programmed
(G51 X Y Z I J K) and X and U, or Y and
V, or Z and W are in one block. The message is can-
celed by RESET
key.
3087 ILLEGAL PLANE SELECT If in G76 multiple thread cutting cycle, on
lathe control, not G18 plane is selected. The message is can-
celed by RESET
key.
3088 FORBIDDEN SPINDLE
MOVING If no spindle encoder is on the machine
and an instruction demanding spindle en-
coder has been programmed (e.g. thread
cutting, orientation). The message is can-
celed by RESET
key.
3089 BUFFER OVERRUN G41,
G42 If buffer has been overrun in offset mode
(G41, G42). The message is can-
celed by RESET
key.
3090 # DEFINITION PROHIB-
ITED Defining prohibited macro variable (#....).
This may be due to its type (e.g., #1000,
... #1015), or it may be prohibited at
parameters 9101 WRPROT1, 9102
WRPROT2. The message is can-
celed by RESET
key.
3091 ERRONEOUS OPERATION
WITH # If, in case of macro variables (#...), the
operands and operations conflict. E.g.: if
logical addition (AND) has been com-
manded between macro variables that can-
not be represented in 32 bits in fix point
mode. The message is can-
celed by RESET
key.
3092 DIVISION BY 0 # If, in case of evaluating a macro
expression, division is to be done by 0. The message is can-
celed by RESET
key.
3093 BUFFER OVERRUN # Buffer has been overrun with macro vari-
ables. The message is can-
celed by RESET
key.
3094
3095
3096
3097
3098 ERRONEOUS ARGUMENT If the function value exceeds the range.
If e.g., SQRT[-4] or ASIN[2]),
if, in case of instruction BCD, the
transformed number is of more than 8
digits,
if, in case of instruction BIN, not a BCD
number is defined on the decades. The message is can-
celed by RESET
key.
3099