NCT Group 100T, Руководство оператора

Страница: 41 / 144

3.5 GRAPHIC POSITION Screens
41
3.5 GRAPHIC POSITION Screens
In automatic operation mode the graphic position display shows the path of the imaginary tool
nose. In the case of graphic position display the tool nose path stored in a buffer is drawn on
the screen. As the buffer (which is a part of the control memory) is finite, it is possible, that in
case of complex and long programs the entire path might not be stored.
3.5.1 GRAPHIC PARAMETERS Screen
In the general displaying area the parameters of graphic position display can be seen in two
columns. The highlighting bar can
be moved between columns with
keys and , while
downwards by means of key
and upwards by means of
key .
The number entered for graphic
plane sets the coordinate system
(axis arrangement) of the graphic
position display. One of 8
arrangements can be chosen.
Diagrams seen on SETTINGS
screen show the direction of axes in each case; The axis name is drawn to the positive direction
and the axis line positions correspond to their start positions on the screen.
With the help of work size the size of the rectangular solid, which contains the work must be
given. The specified sizes are diametric and length values, i.e., they are positive in all cases
(The work position can be influenced when selecting the graphic plane). Should the given
sizes be correct (the work sizes are positive values), then the
screen center and the graphic
scale are calculated automatically.
The screen center is calculated from the work sizes and axis arrangement automatically ,
However definition of the screen center does not change sizes. The point defined as screen
center will always be in the center of the screen at the start of graphic position display.
The graphic scale defines the size of drawing displayed on the screen. If the scale is 1, then 1
raster equals to 1 mm. The graphic scale is always calculated from the work size and graphic
plane, when those are changed. In case of automatic scale defining the work size is taken into
account enlarged by 10%, due to which a little margin appears round the drawing displayed on
the screen. The drawing area can always be halved or doubled by means of page buttons up
and down. Naturally in this case the diagram is re-drawn. In case of graphic position display
the graphic scale occurs on the right side of the screen in form of a scale. A scale unit is 60
rasters long, thus in case the graphic scale is 1, number 60 000 displayed above indicates that
the length of a scale unit is 60 mm.