NCR SelfServ 84 Walk-Up, Руководство пользователя

Страница: 21 / 22

NCR Proprietary Information ‐ not to be disclosed or reproduced without written consent. © 2017, 2018 by NCR Corporation, Atlanta, Georgia, U.S.A. http://www.ncr.com.All Rights Reserved
B006 ‐ 7519 ‐ G000
Variant Details ‐ CEN I, Standard Collar ATM
NCR SelfServ™ 84 Walk ‐ Up ATM Site Preparation
9 ‐ 8
SERVICING AREAS ‐ MINIMUM ‐ SINGLE ATM
This is the minimum area required for operating and servicing the ATM.
Wherever possible the ATM should be installed within the optimum servicing
area. Installing the ATM in the minimum servicing area may increase the
servicing and/or upgrading time.
If the minimum area is not available then consult your local service
representative. Every site is different and you may still be able to install the
ATM but with further increases to servicing and/or upgrading time.
If you install in the minimum area then note that doors can open, and devices
rack out, beyond the area shown. Always leave as much space as possible
around the ATM to facilitate safe operation and servicing.
Short Sleeve Long Sleeve
*1a *1b
760 mm
(29.92 in.)
175 mm
(6.89 in.)
450 mm
(17.72 in.)
326 mm
(12.83 in.)
750 mm
(29.53 in.)
1000 mm
(39.37 in.)
203 mm
(7.99 in.)
Maximum
110 mm
(4.33 in.)
1080 mm
(42.52 in.)
110 mm
(4.33 in.)
770 mm
(30.31 in.)
375 mm
(14.76 in.)
*2
3
175 mm
(6.89 in.)
375 mm
(14.76 in.)
1520 mm
(59.84 in.)
2026 mm
(79.76 in.)
2352 mm
(92.60 in.)
* denotes small (<10% volume) infringements permitted in these areas
265 mm
(10.43 in.)
Minimum clearance area is composed of:
Mandatory left OR right
Basic clearance
1a
OR
Mandatory and either
1b 2
If configured with SDM, SCPM, BNA or GBNA/RU on left hand side -
If the UPS is located in the safe enclosure
3
2 1a
OR
1b
and
All other configurations -
1b
OR
Mandatory and either
1a
2
If configured with SDM, SCPM, BNA or GBNA/RU on right hand side -
If the UPS is located in the safe enclosure
3
*1a *1b
750 mm
(29.53 in.)
1000 mm
(39.37 in.)
2140 mm
(84.25 in.)
330 mm
(12.99 in.)
Maximum
110 mm
(4.33 in.)
1080 mm
(42.52 in.)
110 mm
(4.33 in.)
770 mm
(30.31 in.)
*2
3
175 mm
(6.89 in.)
2466 mm
(97.09 in.)
375 mm
(14.76 in.)
375 mm
(14.76 in.)
1520 mm
(59.84 in.)
326 mm
(12.83 in.)
175 mm
(6.89 in.)
577 mm
(22.72 in.)
760 mm
(29.92 in.)
Minimum clearance area is composed of:
2 1a
OR
Basic clearance
* denotes small (<10% volume) infringements permitted in these areas
265 mm
(10.43 in.)
1b
1a
OR
Mandatory and either
1b 2
If configured with SDM, SCPM, BNA or GBNA/RU on left hand side -
and
All other configurations -
Mandatory left OR right
1b
OR
Mandatory and either
1a
2
If configured with SDM, SCPM, BNA or GBNA/RU on right hand side -