Transferring Files To and From a Remote Location
NCR S46 Server MP-RAS Support Guide
2-45
Parameter
Values
Description
Port=
1, 2
Server COM port to use for file
transfer
Note: The COM port must be the
same as the console redirection port.
Console redirection defaults to COM1.
Baud=
300, 1200, 2400,
4800, 9600, 19200,
38400, 57600,
115200
Baud rate
Note: The file transfer baud rate
must be the same as the console
redirection baud rate. Console
redirection defaults to 38400 baud.
Only 9600, 19.2K, and 38.4K are
recommended.
DownloadDir=
<directory name>
Directory into which files are
downloaded on the server by the rf
utility
Note: NCR does not specify a default
directory. Files are downloaded into
your current directory.
Handshaking=
XON/XOFF
RTS/CTS
None
Type of flow control to use
Note: The flow control setting must
be the same as the console
redirection flow control setting.
Console redirection defaults to
RTS/CTS + Carrier Detect monitoring.
Choose RTS/CTS for file transfers.
Protocol=
ZMODEM
YMODEM
File transfer protocol
Note: The default set by NCR is
ZMODEM.
Reboot=
YES
NO
Specifies whether to reboot server
after file transfer is complete
Note: Default should be YES.
Filelist=
<filename>
File containing a list of files to send
when using the sf utility
Note: NCR does specify a default.
Files to be sent are specified on the sf
command line.
Содержание S46
