NCR S46, Руководство пользователя

Страница: 22 / 90

Performing a Full Installation
1-12 Installing MP-RAS
4. From the main SCU menu, highlight “Step 3: Change Configuration
Settings,” and press Enter.
5. Specify an administrative boot/configuration password. If the password
has not been specified, you may press Esc when prompted to bypass this
password, or you may specify a new password and then verify. This
password may be disabled from the System Board setup screen.
Note: Except for EISA and ISA cards, no board names are used, but are
referenced by class name (for example “PCI SCSI Device”), PCI “Bus
number,” and “Dev letter.”
The device scan order, as specified in the NCR S46 Server Users Guide,
Chapter 2, “Getting Started,” can help you determine which specific
vendor card occupies which PCI slot.
“PCI Undefined Device” denotes the INCA (Interrupt and Control ASIC)
chip which arbitrates bus and control handshaking, and can be enabled to
checks such things as internal voltages, temperature, fan failures and
chassis intrusion.
“PCI RAM Device” denotes the Orion Memory Controller (OMC) chip.
6. Highlight “System Board” and press Enter.
–
Under “MP Spec Version (Systems Group),” verify that “MP Spec
V1.1” is selected.
–
Under “PCI System Error Detection (Management System Group),”
verify that “PCI System Error Detect” is Enabled.
–
Under “Secondary IOAPIC Control Option(System Performance),”
verify “Disable Secondary IOAPIC” is listed.
–
Under “Shadowing ISA ROMs Options (Memory Subsystem
Group),” verify that all memory regions are “Enabled” except for
regions used as “shared memory” (memory shared between an adapter
and the system, such as on the EiconWAN adapter or the Server
Monitor Module) or regions assigned as memory-mapped I/O. An
adapter’s memory assignments can be viewed from the Global
Resources Map in the SCU.
Note: ROM Shadowing is automatically disabled for an adapter whose .CFG
file contains the string “CACHE=NO” in its memory references.