34
Document Number
DCV-00545
Date Released
Jul. 2020
Revision Number/Security level
R01 S2
Retrofit OPTIC 5 Touch+ InvencoLink Wayne Ovation (US & Canada)
Installation Guide
4.2.2 Install the InvencoLink Converter
This Retro-Fit Kit does not include a communications method for the OPT. When this Retro-Fit Kit is being
installed on Side A (i.e. the first side) of the dispenser, a communications method MUST first be installed.
The approved communications methods are listed below.
UL Report Number
Kit Part Number
Retro-Fit Kit Description
MH61528
6009-0008-8801
InvencoLink DSP232
For Side B (i.e. the second side), you MUST have Side A (i.e. the first side) already installed, and you
may then proceed to §4.3 Installation Procedure.
For Side A (i.e. the first side), select the PSU Plate Assembly from this Retro-Fit Kit package (EZ0632)
and apply the communications method selected from the table above, following the installation
instructions supplied with that Kit (DCV-00205).
Once the communications method has been installed onto the PSU Plate Assembly, proceed to §4.3
Installation Procedure.
